HiBar 50 Pendant | Compact Lighting Ltd

HiBar 50 Pendant


HiBar 50 Pendant

 

  • Wide variety of options including stand alone, continuous system and direct/indirect.
  • Stand alone direct units: 597mm (1250/2500lm), 1148mm (2600/5000lm) and 1428mm (3250/6250lm).
  • Stand alone direct and indirect units: 1148mm (2600/5000lm direct and 650lm/1250lm indirect) and 1428mm (3250/6250lm direct and 650lm/1250lm indirect). Indirect light section is 280mm long, positioned centrally in the top of the luminaire.
  • System direct units: straight 1124mm (2600/5000lm) and 1404mm (3250/6250lm) lengths and corner 600x600mm (2x1300/2x2500lm). Starter kit is required to complete run.
  • System direct and indirect units: 1124mm (2600/5000lm direct and 650lm/1250lm indirect) and 1428mm (3250/6250lm direct and 650lm/1250lm indirect). Indirect light section is 280mm long, positioned centrally in the top of the luminaire. Starter kit is required to complete run.
  • Colour temperatures of 3000K and 4000K are available as standard.
  • Fixed output is standard but also available with dimmable control gear.
  • Control gear is integral.
  • Extruded aluminium body and cast aluminium end plates (end plates are pre-fitted to stand alone units – end plates for systems are supplied separately as part of starter kit) finished in white polyester powder coating as standard.
  • Other finishes are also available.
  • Passive thermal management.
  • Opal diffuser is standard.
  • 3m wire suspension kit supplied as standard for pendant mounting.
  • Fitted with LEDs compliant to Zhaga Interface Specification Book 7.
  • Protection rating of IP20.
  • Supplied with a 3m mains tail as standard on stand alone luminaires. System variants are through-wired as standard.
  • Starter kit for system variant (mains entry cable and two end plates with fixings) supplied separately.
  • See data sheet for full ordering information. 
60012001500600x600